Industrial Process Chiller Service and Maintenance
Category : Industrial Process Chillers
Maximus Chillers recently carried out service & maintenance to an Italian chiller
Service and Maintenance of the Water Level Sensor for the Industrial Process Chiller
The industrial process chiller has a water treatment schedule, but on this visit, the water level sensor needed service and maintenance. This is because the three prongs of the sensor were not completing continuity. The prongs complete the continuity from the wire going into the sensor, along the prong, then to another wire completing continuity back to the controls of the chiller
Low Water Prong
If the controls loose continuity to the low water prong, the alarm is triggered and a call out is arranged to resolve the issue
Correct Level Prong
In normal operation, the correct level prong is activated and the chiller runs as normal
High Water Level Prong
Should the high water level prong be activated, again the alarm is triggered and a call out arranged
0161 370 7193
service@maximuschillers.com
Service and Maintenance Visit to the Industrial Process Chiller
As we were already on site to carry out the service and maintenance of the industrial process chiller, so there was no need to arrange a call out. We soaked the sensor for an hour in a special a decontamination chemical that has been designed to restore the prongs. That done, the rest of the maintenance was carried out including the tightening of the wiring and motor connectors. It was possible to do this on this visit as the factory was not in production
Run Testing
All readings around the chiller were taken when the factory went back into production. We found the fridge system to be working with optimum efficiency, meaning that the chiller will use the optimum amount of electricity. Efficiency is a great concern to a factory as they want to reduce their carbon footprint as much as possible
Read more on our webpage | Click Here
Follow this link for the IOR celebration of chiller service engineers | Click Here