0161 237 3727 service@maximuschillers.com
Featuring planned preventative chiller maintenance, which is part of a series of longer, in depth articles. News Article No.2 This time concentrating on the checks, adjustments and diagnosis our engineer carries out while on site. We can extend the life of your plant...
Introducing a series of in depth news articles, this time featuring the chiller maintenance checklist: News Article No.1 This article has been written with you- the customer in mind. Read below for practical advice on how to keep your chillers in the best condition....
Chiller Parts Supplier of Compressors Centrifugal As a chiller parts supplier, all kinds of centrifugal compressors are remanufactured in our workshop. With an overhead gantry crane and specialist equipment to hand- Maximus Chillers completes the picture. We have a...
Packaged chiller service due to a refrigerant leak, resulting in a trip out. This visit was to identify the leak and get the plant back online. Leak Testing during Packaged Chiller Service Nitrogen was added to the system to aid in the identification of the leak. All...
On this chilling plant maintenance visit, particular attention was made to compressor loading. This was to ensure that the compressors are capable of operating at 100%. With summer now here- we want the plant capable of running at full capacity. Controller Loading...
The photo is showing air cooled chiller condenser maintenance being carried out by Maximus Chillers. 6 water cooled chillers are located in the plant room below. They are 750 kw single screw compressors with a control panel located to the side of each. On this visit,...
During a recent process chiller vacuum service, our engineer achieved a deep vacuum of 2 Torr. This is the same pressure as if the Torr gauge had been fitted directly to the vacuum pump. Torr Gauge The Torr gauge was fitted to a refrigerant hose. The refrigerant...
Prior to this chilling plant controls maintenance visit, another contractor had changed some of the settings and adjustments in the controllers. They did this while they were diagnosing a fault with the water system and the pumps. Therefore, this visit was to...
Reciprocating Compressors Industrial chiller maintenance including a reciprocating compressor with 8 cylinders. They always have an even number of cylinders so that the compressor is balanced. Open Drive Because the refrigerant being used in this article is ammonia,...
The photo shows HFC chiller service being carried out on a 600kW machine. It consists of two systems with a large Bitzer compressor for each system. It has a bespoke Micro Control System front end to run the machine and stop it should there be a fault condition. The...