by Maximus Chillers | Nov 22, 2022 | Articles
An ammonia chiller had been found to need an evaporator repair on a previous call out. The water Inlet and Outlet to the plate evaporator had been valved off and then it had been drained down. This was to stop any further leaking of water into the refrigerant system....
by Maximus Chillers | Oct 21, 2022 | Overseas Customers
A Saudi chiller repair has just been carried out by our overseas engineer Dave Thompson. There are 17 air cooled industrial process chillers across 5 factories in Jeddah, each with a capacity of 900 kW. This visit was mainly concerned with a controls issue… Saudi...
by Maximus Chillers | Aug 30, 2021 | Overseas Customers
We arranged the trip to carry out Saudi chiller commissioning for our Company Director and overseas engineer Dave Thompson. 2x 500kw air cooled chillers had been positioned at high level on a gantry. These were at the back of a newly constructed building at a factory...
by Maximus Chillers | Nov 21, 2020 | Articles
We at Maximus Chillers will optimise the efficiency and take years off the life of your plant with preventative chiller maintenance. News Article No.9 Control Panels The first thing our engineers check at the start of the maintenance is the control panel of the...
by Maximus Chillers | Jun 8, 2020 | Chilling Plant
On this chilling plant maintenance visit, particular attention was made to compressor loading. This was to ensure that the compressors are capable of operating at 100%. With summer now here- we want the plant capable of running at full capacity. Controller Loading...
