by Maximus Chillers | Jun 14, 2020 | Chiller Technology
Packaged chiller service due to a refrigerant leak, resulting in a trip out. This visit was to identify the leak and get the plant back online. Leak Testing during Packaged Chiller Service Nitrogen was added to the system to aid in the identification of the leak. All...
by Maximus Chillers | Jun 8, 2020 | Chilling Plant
On this chilling plant maintenance visit, particular attention was made to compressor loading. This was to ensure that the compressors are capable of operating at 100%. With summer now here- we want the plant capable of running at full capacity. Controller Loading...
by Maximus Chillers | May 31, 2020 | Chiller Components
The photo is showing air cooled chiller condenser maintenance being carried out by Maximus Chillers. 6 water cooled chillers are located in the plant room below. They are 750 kw single screw compressors with a control panel located to the side of each. On this visit,...
by Maximus Chillers | May 3, 2020 | Chiller Technology
The photo shows HFC chiller service being carried out on a 600kW machine. It consists of two systems with a large Bitzer compressor for each system. It has a bespoke Micro Control System front end to run the machine and stop it should there be a fault condition. The...
by Maximus Chillers | Apr 26, 2020 | Chiller Technology
Maximus Chillers has just carried out process chiller service to a flooded evaporator. The refrigerant seal on a four bolt, flanged coupling had been found to be leaking liquid refrigerant. There was no possibility to valve off that section of the machine, as the...
